Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

异戊醇低压热解的同步辐射真空紫外光电离质谱研究

作为新兴生物燃料,大分子醇类燃料在低压下的火灾安全基础迫切需要得到深入研究。热解过程作为火灾过程的初始阶段直接控制着火过程,火灾中碳烟颗粒的产生也依赖于热解反应,因此可燃物的低压热解研究在其低压火灾基础研究中具有重要意义。利用同步辐射真空紫外光电离质谱方法研究了异戊醇在0.2atm下的流动反应器热解,探测到了20余种热解产物,包括烯丙基自由基和C_4H_8O、C_5H_8、C_6H_6等同分异构体,并测量了其摩尔分数。基于实验结果,对燃料分解路径和主要产物的生成及消耗路径进行了探讨。与本组之前正戊醇热解实验的对比表明,由于存在支链结构,异戊醇在热解中比正戊醇更容易产生戊烯、丁烯和丙烯,但更少地产生乙烯。此外,异戊醇在热解中能够生成更多的丙炔和丙二烯等环状化合物前驱体,令其苯和1,3-环戊二烯的生成量更高,表明异戊醇比正戊醇更易于生成多环芳烃和碳烟。     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

铝粉爆炸无火焰泄压技术及装备研究

为有效防止粉尘爆炸泄爆引起的二次爆炸及火灾问题，基于泄压理论、消火机理，设计开发无火焰泄压装置，装置主要由消火结构、底座、爆破片及夹持机构组成，消火结构由不锈钢金属丝网组成。选择铝粉尘为测试粉尘，通过自建除尘系统试验平台进行试验研究。结果表明:无火焰泄压装置可成功阻止火焰传播，装置释放的冲击波在5 m外均小于5 kPa，除尘系统内部最大泄爆压力为0.1 MPa，装置前端火焰传播速度均大于100 m/s。     

预腐蚀铝合金材料裂纹萌生寿命评估

铝合金在航空工业中广泛应用,因此对于铝合金构件的寿命评估很重要。利用扫描电子显微镜(SEM)原位观测技术,研究了预腐蚀铝合金试件在循环应力作用下的疲劳裂纹萌生和扩展行为。结果表明腐蚀坑对于裂纹萌生扩展行为具有强烈的影响。基于局部应变法,提出了一种预测带有腐蚀损伤的铝合金疲劳裂纹萌生寿命的评估公式。     

基于生命周期的产品碳足迹评价与核算分析

近年来,越来越多的企业对其产品进行碳足迹评价,评价方法主要采用产品碳足迹评价标准提供的碳计量方程,如GHG Protocol、ISO14064、PAS 2050、TS Q 0010等。在介绍相关评价标准的基础上,分析了产品碳足迹的评价步骤,最后利用河北盛华化工有限公司生产的PVC产品为例,给出了基于生命周期的B2B模式的产品碳足迹评价的案例。为企业及相关机构开展碳足迹评价提供借鉴作用。     

除镉最佳混凝剂的筛选及应用条件研究

通过采用聚合氯化铝铁（PAFC）、氯化铁（FeCl3）及聚合硫酸铁（PFS）对含镉废水的处理研究表明,三种混凝剂对含镉水体均有良好的处理效果,同等条件下,三种混凝剂对含镉水体去除率分别为98.22%、92.19%和93.63%。研究了PAFC对含镉水体的混凝沉淀效果,实验结果表明：碱性条件有利于镉离子的沉淀,当pH为9～11时,去除率可达98.00%左右;对于初始浓度为4.000 0 mg.L-1的含镉废水,经处理后,水体浓度可降至0.184 0 mg.L-1,对于初始浓度为0.400 0 mg.L-1的含镉废水,经处理后水体浓度降至0.007 2 mg.L-1;废水中投加一定量的石灰乳对PAFC除镉起一定的作用,投加量达30.00 mg.L-1时,其去除率达99.91%;通过对PAFC除镉动力学拟合,符合一级线性动力学方程。     

改性人造沸石处理含黄玉铬洁(Ⅵ张焕)祯地下水的实验研究

为了提高人造沸石对地下水中铬(Ⅵ)的去除能力,采用氯化铝对人造沸石进行改性。确定最佳改性条件:20%氯化铝溶液,液固比12 mL/g,室温下以180 r/min振荡改性8 h;最佳除Cr(Ⅵ)条件:pH值为4～8,液固比为33.3 mL/g,室温下水浴恒温振荡2 h。改性沸石对铬(Ⅵ)的吸附符合Langmuir及Freundlich等温线方程,由Langmuir吸附等温线可得其吸附容量为5.624 mg/g。在最佳反应条件下,水样中铬(Ⅵ)浓度可由5 mg/L下降到0.026 mg/L,低于0.05 mg/L,满足GB/T 14848—93《地下水环境质量标准》Ⅲ类标准。     

Efficiency and degradation products elucidation of the photodegradation of mefenpyrdiethyl in water interface using TiO2 P-25 and Hombikat UV100

The photodegradation of mefenpyrdiethyl (MFD), an herbicide safener, was investigated in aqueous suspensions by using Degussa P-25 and Hombikat UV100 titanium oxide under simulated sunlight irradiation. The effects of initial concentration of the herbicide, pH, catalysts and hydrogen peroxide doses as well as their combinations were studied and optimized. Accordingly, the kinetic parameters were determined and the effectiveness of the processes was assessed by calculating the rate constants. A pseudo first-order kinetics was observed. Under experimental conditions, the degradation rate constants were strongly influenced using P-25 and no noticeable effect was observed for Hombikat UV100. DFT calculations with B3LYP/6-311+G(2d,p)//B3LYP/6-31+G(d,p) level of theory were performed to check whether significant conformational changes occur when the charge state of the MFD substrate changes and whether these changes could play a role in the dependency of photodegradation rate constant on the studied pH. High resolution mass spectrometry (FT-ICR/MS) was implemented to identify the main degradation products.     

浅论通风隔声窗的发展

分析当前通风隔声窗的现状,以及通风隔声窗发展中的几个关键点,即:安静、节能、智能、清新空气、美观;结合正升声学公司开发的通风隔声窗产品讨论通风隔声窗在未来住宅建筑中的应用。